R3‑13 Panel Mount Fuse Holder, 10A 250V AC DC for 6×30mm Glass & Ceramic Fuse Tube
R3‑13 screw‑in panel mount fuse holder, rated 10A 250V/125V AC DC, fits standard 6×30mm glass & ceramic fuses. Bakelite UL94‑V‑0 housing, M15*1.0 panel mounting. Factory direct supply.
Get a Quote
Product Overview
The R3‑13 panel‑mount screw‑in fuse holder is a chassis‑mount circuit‑protection component from GFEFUSE. It accepts industry‑standard 6×30 mm glass and ceramic fuse tubes, rated for 10 A continuous current at 250 V AC /125 V DC. Constructed with UL‑94V‑0 bakelite housing and phosphor‑bronze terminals, this holder delivers stable contact performance and high‑voltage resistance for industrial power supplies, instruments and household equipment. M15*1.0 thread enables quick panel installation without extra fixtures.
Key Features
- Fits standard 6×30 mm glass / ceramic fuse tubes
- Rated 10 A, 250 V AC /125 V DC, breaking capacity 50 A
- Bakelite body, flame retardant UL‑94V‑0
- 0.5 mm phosphor bronze terminals for low‑resistance connection
- High dielectric strength: withstand voltage 3000 VAC
- Low contact resistance＜5 mΩ; insulation resistance＞100 MΩ
- M15*1.0 screw‑thread panel mounting
- Simple twist‑cap design for fast fuse replacement
Technical Specifications
| Item | Parameter |
|---|---|
| Model No. | R3‑13 |
| Rated Current | 10A |
| Rated Voltage | 250V AC /125V DC |
| Compatible Fuse Size | 6×30 mm fuse pipe |
| Breaking Capacity | 50A |
| Housing Material | Bakelite (UL‑94V‑0) |
| Terminal Material | 0.5 mm Phosphor Bronze |
| Withstand Voltage | 3000 VAC |
| Contact Resistance | ＜5 mΩ |
| Insulation Resistance | ＞100 MΩ |
| Panel Mount Thread | M15*1.0 |
| Note | Fuse not included; product subject to change without prior notice |
Dimensions & Installation
- Mounting thread：M15*1.0
- Reference overall dimension：54.1 mm total length; panel hole for M15 thread mounting.
- Installation：Drill panel hole for M15*1.0 thread, pass holder through panel, fasten by lock‑nut; twist open cap to insert or replace 6×30 mm fuse tube.
Typical Applications
- Industrial power supplies & converters
- Test instruments & lab equipment
- Household electrical appliances
- Audio equipment
- Charging devices & control cabinets
- General‑purpose chassis circuit over‑current protection
FAQ
1: What fuse fits the R3‑13 fuse holder?
This holder is made for standard 6×30 mm glass tube fuses and ceramic tube fuses. Fuse is NOT supplied with holder.
2: What panel hole size for R3‑13 mounting?
Mounting thread is M15*1.0, drill panel hole matching M15 thread specification for panel‑through installation.
3: Can R3‑13 be used for DC circuits?
Yes, rated for 125 V DC and 250 V AC, suitable for both AC & DC low‑voltage circuit protection.
4: What is breaking capacity of R3‑13?
Breaking capacity is 50A. Please select proper fuse matching your short‑circuit condition.
About Manufacturer
Dongguan GongFu Electronic Co., Ltd. focus on safety fuse and fuse holder manufacturing. We supply panel‑mount fuse holders, PCB fuse sockets, inline fuse holders with strict electrical‑safety test. Customization & bulk wholesale available. Contact us for datasheet, quotation and samples.
Get Datasheet | Request Quotation |
