GF-70BC Inline Automotive Blade Fuse Holder 16AWG 15A
GF-70BC inline automotive blade fuse holder for ATO/ATC medium fuses, 1015-16AWG 150mm wire, 15A rated, UL94V-0 flame retardant. Request samples & datasheet.
Get a Quote
GF-70BC Inline Automotive Blade Fuse Holder for ATO/ATC Fuses, 1015-16AWG 15A
GF-70BC is an inline automotive blade fuse holder designed for medium-sized ATO/ATC insert fuses. It comes pre-assembled with 1015-16AWG lead wire (150mm length), Φ6 heat-shrinkable sleeve (125°C / 600V), and a blue middle terminal for quick and reliable connection. The housing adopts UL94-V0 flame-retardant material with internal terminals ACN-1, ACN-2, ACN-3 ensuring stable insertion force (>6N after 6 plug cycles). Rated 15A, widely used in automotive, RV, marine and industrial equipment circuit-protection wiring harnesses.
Key Features & Benefits
- ✅ Compatible with standard medium ATO/ATC automotive blade fuses
- ✅ Pre-wired with 1015-16AWG lead wire, total length 150±5mm for easy inline installation
- ✅ Rated current: 15A; suitable for 12V / 24V automotive and low-voltage DC systems
- ✅ Housing material: UL94-V0 flame-retardant grade for high safety
- ✅ Equipped with Φ6 heat-shrinkable sleeve (125°C, 600V) for insulation and environmental protection
- ✅ Blue middle terminal for secure crimping connection
- ✅ Internal terminals ACN-1 / ACN-2 / ACN-3; insertion force >6N after 6 plug cycles, ensuring stable contact
- ✅ Strict quality control: no burrs in hot-bonding, firm terminal crimping, no short/open circuit, good conduction, no wire-skin damage
- ✅ Cost-effective for mass production wiring harness assembly
Typical Applications
GF-70BC inline fuse holder is widely deployed for over-current protection in various low-voltage DC wiring systems:
- 🚗 Automotive & truck wiring harness circuit protection
- 🚗 Car audio, lighting and accessory circuit fuse installation
- 🏕️ RV / camper / motorhome 12V electrical system protection
- ⛵ Marine / boat / yacht low-voltage DC circuit protection
- 🏭 Industrial control equipment and power distribution wiring
- 🔋 Battery bank and solar off-grid system auxiliary protection
Main Electrical & Mechanical Specifications
| Model | GF-70BC (GFEFUSE) |
| Compatible Fuse Type | Medium-sized ATO / ATC automotive blade fuse |
| Rated Current | 15A |
| Wire Specification | 1015-16AWG |
| Wire Length | 150±5mm (L=150±8mm per drawing) |
| Heat-Shrink Sleeve | Φ6, 125°C, 600V |
| Terminal Type | Blue middle terminal |
| Internal Terminals | ACN-1, ACN-2, ACN-3 |
| Insertion Force | >6N after 6 plug cycles |
| Flame Retardant Grade | UL94-V0 |
| Brand | GFEFUSE (Dongguan GongFu Electronics Co., Ltd.) |
Mechanical Dimensions
Unit: mm. Refer to datasheet drawing for full tolerance details.
| Dimension Item | Value (mm) | Tolerance |
|---|---|---|
| Housing width (front view) | 18.8 | ±0.3 |
| Housing height (front view) | 15.2 | ±0.3 |
| Overall height (side view) | 28.9 | ±0.3 |
| Inner cavity height | 22.8 | ±0.3 |
| Pin length | 5.0 | ±0.1 |
| Body width (side view) | 14.2 | ±0.2 |
| Total wire length | 150 | ±5 |
Quality & Manufacturing Standards
- Hot-bonding surface: seamless, no burrs, clean finish
- Terminal crimping: firmly pressed, no wire breakage
- Electrical: no short circuit, no open circuit, no dislocation, good conduction
- Wire insulation: no damage to wire skin
- Manufactured by Dongguan GongFu Electronics Co., Ltd. (GFEFUSE brand)
FAQ — Technical & Commercial Questions
1: What type of fuses does GF-70BC accept?
:GF-70BC is designed for standard medium-sized ATO / ATC automotive blade fuses (regular blade fuse, not mini or maxi).
2: What is the wire gauge and length of this fuse holder?
It comes with 1015-16AWG wire, total length 150±5mm, pre-installed with Φ6 heat-shrink sleeve.
3: What is the rated current of GF-70BC?
The rated current is 15A. It is suitable for 12V / 24V low-voltage DC automotive and industrial circuits.
4: Is the housing flame-retardant?
Yes, the housing material meets UL94-V0 flame-retardant grade for high safety in enclosed environments.
5: Can you provide custom wire length or terminal type?
Yes, OEM / ODM customization is available for wire length, gauge, terminal type and sleeve specification. Contact our engineering team for evaluation.
6: Can I get engineering samples for testing?
Yes, please submit the inquiry form with target quantity and application details to request test samples and full datasheet.
Request Quotation / Technical Support
Please inform us target model, order quantity, required wire length / terminal customization, and application environment. Our sales-engineer will reply you within 24 working hours.
