Portafusibles atornillable ANS-800 ANL | EssFuse de CC de 30 A a 800 A
Portafusibles atornillable ANS-800 ANL para fusibles ANL-A: 30 A–800 A CC, 12 V–250 V, base UL94 V-0 PBT+GF30%, espárragos M8. Para protección de vehículos eléctricos y baterías.
Solicita un presupuesto
Bloque de fusibles de alta corriente atornillable for GFEFUSE ANL-A series bolt-on fuses. UL94 V-0 PBT+GF30% base, M8 studs, Grade 8.8 fasteners.
12V–250V CC
UL94 V-0
PBT + GF30%
M8 Studs
Tornillos de grado 8.8
Because ANL-class bolt-on fuses carry very high DC currents, engineers choose the ANS-800 when they need a rigid, flame-retardant mounting base. In particular, its PBT+GF30% housing meets UL94 V-0. Moreover, M8 studs and Grade 8.8 hardware keep contact stable under load. As a result, it suits main-feed protection in EVs, battery banks and DC power systems.
Product at a glance (for quick reference)
- Model: ANS-800 ANL bolt-on fuse holder; compatible with GFEFUSE ANL-A series bolt-on fuses.
- Ratings: 12V–250V DC; 30A–800A DC (depends on the fuse installed).
- Base: PBT + 30% glass fiber, UL94 V-0; fasteners: Grade 8.8 steel screws, stainless steel nuts.
- Terminals: M8 studs; mounting hole Ø6.5 mm on 25 mm centers.
- Body: 86 mm × 24 mm × 42 mm; terminal centers 62 mm.
- Typical use: automotive harness, NEV control box, DC power supply, communication equipment, battery protection circuits.
Presupuesto
| Modelo | ANS-800 ANL bolt-on fuse holder |
|---|---|
| Fusible compatible | GFEFUSE ANL-A series bolt-on fuse |
| Tensión nominal | 12V – 250V CC |
| Calificación actual | 30A – 800A DC |
| Material base | PBT + GF30%, UL94 V-0 |
| Sujetadores | Tornillo de acero de grado 8.8, tuerca de acero inoxidable |
| Terminal stud | M8 |
| Mounting hole | Ø6.5 mm |
| Aplicaciones | Automotive harness, NEV control box, DC power equipment, communication equipment, battery protection circuit |
Características principales
- Up to 800A DC: covers 30A–800A with ANL-A fuses.
- UL94 V-0 housing: PBT + 30% glass fiber for strength and flame retardancy.
- M8 studs: suit heavy-gauge battery and alternator cables.
- Grade 8.8 hardware: high-strength screws with stainless steel nuts.
- ANL footprint: designed for GFEFUSE ANL-A bolt-on fuses.
Por qué funciona en sistemas de vehículos eléctricos y de corriente continua.
Because the holder covers 12V–250V DC and up to 800A, it suits high-current main feeds that ordinary blade fuses cannot handle. Consequently, OEMs use it in NEV control boxes, battery protection circuits and DC power supplies. For example, an 800A rating can protect a heavy inverter-to-battery cable. However, you must never size a fuse above the cable’s ampacity. In addition, the glass-reinforced PBT housing stays rigid under high vibration.
Dimensiones mecánicas (mm)
| Dimensión | Valor (mm) | Notas |
|---|---|---|
| Body length | 86 | Front view overall length |
| Body width | 24 | Front view width |
| Body depth | 42 | Side view depth |
| Mounting hole diameter | Ø6.5 | Panel mounting hole |
| Mounting hole spacing | 25 | Between mounting holes |
| Terminal studs | M8 | Fuse mounting studs |
| Terminal center height | 62 | Between upper and lower M8 centers |
Dimensions per manufacturer datasheet; dimensions are subject to change without notice. Verify before production.
Cómo realizar el pedido e instalarlo
First, select an ANL-A series fuse whose rating matches your cable and load. Next, bolt the holder to the panel through the Ø6.5 mm mounting holes. Then torque the M8 terminals according to the fuse manufacturer’s instructions. Finally, connect the cable lugs and tighten the stainless steel nuts. If you need a specific IP rating, simply specify the protection level when ordering.
Aplicaciones
- Protección de la alimentación principal y del alternador a la batería del arnés de cableado automotriz
- New energy vehicle (NEV) / EV control box and DC junction boxes
- DC power supplies, UPS and high-current inverters
- Battery protection circuits, off-grid / solar battery banks
- Communication equipment and heavy DC loads up to 800A
Preguntas frecuentes
Compatibilidad y valores nominales de los fusibles
Which fuses fit the ANS-800 holder?–
¿Cuál es la tensión y la corriente nominales?+
¿Cuál es el material base y su índice de inflamabilidad?+
What stud size does it use?+
Instalación, dimensiones y reemplazo
How does it differ from a MEGA / 298 holder?+
¿Cuáles son las dimensiones de montaje?+
Where is it typically used?+
