GF-70BM Micro2 Automotive Inline Fuse Holder with 16AWG Lead Wire
GF-70BM is a micro2 automotive inline fuse holder with pre-crimped 16AWG lead wires. Rated 15A, 94V-0 flame retardant housing, Φ6 heat-shrink casing rated 125°C/600V, and a butt splice connector at the wire end. Length 150±8mm.
Get a Quote
GF-70BM Micro2 Automotive Inline Fuse Holder with 16AWG Lead Wire
Product Overview
The GF-70BM is an inline fuse holder designed to accept micro2 (APS/ATT) automotive blade fuses. It ships as a complete wired assembly: the fuse housing is pre-crimped to 1015-16AWG automotive wire, covered with Φ6 heat-shrink tubing, and terminated with a blue butt splice connector on the opposite end. This “ready-to-install” configuration eliminates on-site crimping and reduces assembly labor in wiring harness production.
Construction
- Fuse type compatibility: Micro2 (APS/ATT) blade fuses
- Rated current: 15A
- Wire: 1015, 16AWG, length 150±8 mm
- Heat-shrink casing: Φ6, rated 125°C, 600V
- Housing flame rating: UL 94 V-0
- Internal terminals: ACN-1, ACN-2, ACN-3 series; plug-in force after 6 taps exceeds 6N
- End termination: Blue middle butt splice connector
Mechanical Dimensions
| Parameter | Value |
|---|---|
| Fuse holder body width | 17.7 ± 0.3 mm |
| Fuse holder body height | 25.1 ± 0.5 mm |
| Terminal spacing | 7.8 ± 0.3 mm |
| Mounting hole spacing | 9.0 ± 0.3 mm |
| Lead wire total length | 124 ± 10 mm (fuse end to splice end) |
| Butt splice length | 25.0 ± 2 mm |
| Wire cross-section | 0.8 ± 0.05 mm |
Quality Requirements
- Hot-bonding area: no flash burrs, clean finish
- Terminal crimp: firm, no broken strands, no short circuit, no open circuit, no misalignment
- Conduction: verified, no insulation damage
Typical Applications
- Automotive wiring harness protection (radiator fan, ECU, body control module)
- Aftermarket dash cam and LED light bar installation
- Marine and RV 12V/24V accessory circuits
- Industrial equipment power input with micro2 fuse
Ordering Information
- Model: GF-70BM
- Wire length: 150 ± 8 mm (custom lengths available on request)
- Packaging: Bulk bag, OEM labeling available
FAQ
1: What fuse type does the GF-70BM accept?
It accepts micro2 (also known as APS or ATT) low-profile automotive blade fuses, rated up to 15A.
2: What wire gauge is used?
1015-style 16AWG automotive wire, 150±8mm long, with Φ6 heat-shrink tubing rated 125°C/600V.
3: What is the flame retardant rating?
The fuse housing is UL 94 V-0, suitable for under-hood and cabin installations.
4: Does the GF-70BM come with a fuse installed?
No, the holder ships without a fuse. Select the appropriate micro2 blade fuse according to your circuit current.
5: Can custom wire lengths be ordered?
Yes, custom wire lengths and terminal types are available for OEM volume orders.
